Mastering the Art of Hanging Patterned Wallpaper on Your Feature Wall- A Step-by-Step Guide

How to Hang Patterned Wallpaper on a Feature Wall

Creating a feature wall with patterned wallpaper can transform any room into a stunning focal point. Whether you’re aiming for a bold and vibrant look or a subtle and elegant design, the right wallpaper can make all the difference. However, hanging patterned wallpaper can be a challenging task if not done correctly. In this article, we will guide you through the process of how to hang patterned wallpaper on a feature wall, ensuring a professional and flawless finish.

1. Preparing the Wall

Before you start hanging the wallpaper, it’s crucial to prepare the wall properly. Begin by cleaning the surface to remove any dust, dirt, or grease. Use a damp cloth to wipe down the wall and then let it dry completely. Check for any cracks or holes and fill them with spackling compound. Once the compound is dry, sand the wall to create a smooth and even surface.

2. Measuring and Cutting the Wallpaper

Measure the height and width of your feature wall to determine the amount of wallpaper needed. Add a few extra inches to account for any mistakes or irregularities in the wall. Lay out the wallpaper on a flat surface and cut it to size using a sharp utility knife. Ensure that the pattern aligns perfectly across the edges to create a seamless look.

3. Pre-pasting the Wallpaper

Pre-pasting the wallpaper is essential for achieving a smooth and wrinkle-free finish. Follow the manufacturer’s instructions for the recommended paste-to-wall or wall-to-paste method. Apply the paste evenly to the back of the wallpaper using a wallpaper brush or roller. Be sure to cover the entire surface, leaving no dry spots.

4. Positioning the Wallpaper

Start by applying the wallpaper to the top of the feature wall, ensuring that the pattern aligns perfectly with the ceiling. Use a level to ensure that the wallpaper is straight. Once the top edge is in place, carefully smooth out the wallpaper using a wallpaper brush or a plastic smoothing tool. Work from the center outwards to avoid air bubbles and wrinkles.

5. Cutting Around Corners and Outlets

When hanging patterned wallpaper, it’s important to cut around corners and outlets to maintain the pattern’s continuity. Use a sharp utility knife to carefully cut around the outlet or corner, ensuring that the pattern aligns seamlessly. Take your time and be precise to avoid any visible gaps or interruptions in the pattern.

6. Sealing the Edges

Once the wallpaper is completely dry and smooth, seal the edges with a wallpaper sealer. This will help protect the wallpaper from moisture and prevent it from peeling or bubbling over time. Use a paintbrush to apply the sealer evenly along the edges, making sure to cover the entire surface.

7. Maintaining Your Feature Wall

To keep your patterned wallpaper looking beautiful, it’s important to maintain it properly. Dust the wallpaper regularly using a soft cloth or a feather duster. Avoid using harsh chemicals or abrasive cleaners, as they can damage the wallpaper’s finish. If any spots or stains occur, gently clean them with a mild detergent and water, being careful not to disturb the pattern.

In conclusion, hanging patterned wallpaper on a feature wall can add a touch of sophistication and style to any room. By following these steps and taking your time, you can achieve a professional and flawless finish. Remember to prepare the wall, measure and cut the wallpaper accurately, pre-paste, position the wallpaper carefully, and maintain it properly to ensure a lasting and stunning feature wall.