How to Apply Scott Living Wallpaper: A Step-by-Step Guide
Wallpaper can transform a room into a cozy and personalized space. Scott Living, a renowned brand in the wallpaper industry, offers a wide range of stylish and high-quality wall coverings. However, applying Scott Living wallpaper can be a daunting task if you are not familiar with the process. In this article, we will provide you with a step-by-step guide on how to apply Scott Living wallpaper like a pro.
1. Prepare the Room
Before you start applying the wallpaper, it is essential to prepare the room. Begin by removing all furniture and decor from the walls. This will give you a clear workspace and prevent any damage to the wallpaper during the installation process. Additionally, ensure that the walls are clean, dry, and free of any imperfections such as cracks or holes. If necessary, repair any damage and sand the walls to create a smooth surface.
2. Measure and Cut the Wallpaper
Accurate measurement and cutting are crucial for a successful wallpaper installation. Use a tape measure to determine the height and width of each wall. Add a few inches to the measurements to account for any cuts or overlaps. Once you have the dimensions, lay out the wallpaper on a flat surface and cut it according to the measurements. Make sure to leave a small overlap at the top and bottom of each piece to ensure a seamless installation.
3. Mix the Paste
Scott Living wallpaper requires pre-pasted wallpaper paste for application. Follow the instructions on the paste package to mix the paste correctly. Use a mixing container and a stirring stick to ensure the paste is well-mixed and free of lumps. Once the paste is ready, let it sit for a few minutes to allow the adhesive to activate.
4. Apply the Wallpaper
Start by applying the wallpaper to the top of the wall, ensuring that the edges are aligned with the ceiling and corners. Use a wallpaper brush to apply the paste to the back of the wallpaper, starting from the top and working your way down. Once the wallpaper is pasted, position it on the wall and smooth it out with a wallpaper smoothing tool. Be sure to remove any air bubbles and wrinkles to achieve a professional finish.
5. Trim the Edges
After the wallpaper has been applied to the entire wall, use a sharp utility knife to trim the excess wallpaper at the ceiling, floor, and corners. Make sure to cut along the edges carefully to avoid damaging the wallpaper. If you encounter any irregularities, use a razor blade to make precise cuts.
6. Allow the Wallpaper to Dry
Once the wallpaper has been applied and trimmed, allow it to dry completely. The drying time may vary depending on the wallpaper type and the environment. As a general rule, wait for at least 24 hours before adding any furniture or decor to the room.
7. Clean Up
After the wallpaper has dried, clean up any paste residue or spills using a damp cloth. Be sure to remove all paste from the surface of the wallpaper to prevent any damage or discoloration.
By following these simple steps, you can successfully apply Scott Living wallpaper and create a stunning space in your home. Remember to take your time and pay attention to detail for the best results. Happy wallpapering!
