How to Crown Molding Outside Corner: A Step-by-Step Guide
Crown molding is a classic and elegant way to add a touch of sophistication to any room. It not only helps to hide the gap between the ceiling and the wall but also provides a seamless transition between different levels of the room. However, one of the most challenging aspects of crown molding is dealing with outside corners. In this article, we will walk you through the process of how to crown molding outside corner, ensuring a professional and seamless finish.
Step 1: Measure and Mark the Outside Corner
Before you start, it’s essential to measure and mark the outside corner accurately. Use a tape measure to determine the length of the molding you need and mark the starting point on the wall. This will help you maintain consistency throughout the installation process.
Step 2: Cut the Molding to Fit the Outside Corner
To achieve a clean and seamless look, you’ll need to cut the molding to fit the outside corner. Using a miter saw, cut the molding at a 45-degree angle on both ends. This will create a 90-degree joint when the molding is placed in the corner.
Step 3: Apply Adhesive to the Molding
Once the molding is cut, apply a generous amount of adhesive to the back of the molding. Use a quality construction adhesive designed for crown molding. Ensure that the adhesive is evenly distributed and covers the entire back of the molding.
Step 4: Position the Molding in the Outside Corner
Carefully position the molding in the outside corner, aligning it with the marks you made earlier. Make sure the molding is flush with the ceiling and wall. Use a level to ensure that the molding is perfectly horizontal.
Step 5: Secure the Molding
To secure the molding in place, use a nail gun or a finish nailer to gently nail the molding to the wall. Be sure to nail at the correct intervals, typically every 16 inches along the molding. Use a nail set to countersink the nails, ensuring a clean and flush finish.
Step 6: Fill Nail Holes and Sand
After the adhesive has dried and the molding is securely in place, fill any nail holes with wood filler. Once the filler has dried, sand the area smooth to create a seamless look.
Step 7: Paint or Stain the Molding
Finally, paint or stain the molding to match the room’s decor. Use a high-quality paint or stain to ensure a durable and long-lasting finish. Apply the paint or stain evenly, taking care to cover all surfaces, including the corners.
By following these simple steps, you can successfully install crown molding in outside corners, creating a professional and polished look in your home. Remember to take your time and pay attention to detail to achieve the best results. Happy molding!
