How to Create a Custom Wrap Skirt Pattern- Step-by-Step Guide for Sewing Enthusiasts

How to Make a Wrap Skirt Pattern: A Step-by-Step Guide

Embarking on a DIY project to create your own wrap skirt is a delightful way to add a personalized touch to your wardrobe. A wrap skirt not only offers comfort but also a stylish silhouette that flatters various body types. In this article, we will guide you through the process of making a wrap skirt pattern, from gathering the necessary materials to cutting and sewing the fabric. Let’s dive in!

Materials Needed:

Before starting, gather the following materials:

1. Fabric: Choose a lightweight, flowing fabric such as cotton, linen, or rayon.
2. Scissors: A pair of sharp fabric scissors is essential for clean cuts.
3. Measuring tape: To measure your body and fabric.
4. Pencil and paper: For sketching the pattern.
5. Pins: To hold the pattern in place on the fabric.
6. Sewing machine: Or a needle and thread if you prefer hand-sewing.
7. Matching thread: For stitching the fabric together.
8. Pattern paper or a large piece of cardboard: To create the pattern on.

Step 1: Measure Your Body

To create a wrap skirt that fits you perfectly, it’s crucial to measure your body accurately. Take the following measurements:

1. Waist circumference: Measure around your waist at the narrowest point.
2. Hip circumference: Measure around your hips at the widest point.
3. Length: Decide the desired length of your skirt, typically around 24-26 inches (61-66 cm) from your waist to the hem.

Step 2: Sketch the Pattern

Using your measurements, sketch the wrap skirt pattern on pattern paper or a large piece of cardboard. The pattern will consist of two main pieces: the front and the back. The front piece will have darts to create a gathered effect, while the back piece will have a pleated waistband.

Step 3: Cut the Fabric

Lay out your fabric with the selvages aligned. Place the pattern pieces on the fabric, ensuring they are oriented correctly. Pin the pattern in place and cut out the fabric, including seam allowances (typically 1/2 inch or 1.27 cm).

Step 4: Sew the Darts and Side Seams

Start by sewing the darts on the front piece of the skirt. Gather the fabric at the dart points and pin them in place. Sew the darts, then sew the side seams of the front and back pieces together.

Step 5: Create the Waistband

Fold the back piece of the skirt in half lengthwise, wrong sides together, and press the edges. Sew along the pressed edge to create the waistband. Then, fold the waistband in half lengthwise and press again. Pin the waistband to the top of the skirt, aligning the raw edges, and sew in place.

Step 6: Attach the Waistband to the Skirt

With the right sides of the skirt and waistband together, pin and sew the waistband to the skirt, leaving an opening for the zipper. Insert the zipper, and then sew the opening closed.

Step 7: Hem the Skirt

Finally, hem the skirt by folding the bottom edge up 1/2 inch (1.27 cm) and pressing. Then, fold it up again by another 1/2 inch and press. Sew the hem in place.

Congratulations! You have successfully created a wrap skirt pattern and sewn your very own wrap skirt. Enjoy your new, stylish creation!